Filter
Top Products
5
15
E470VLE
Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
1. From the Picture Settings menu, use
the Arrow buttons on the remote to
highlight More, then press OK.
2. Use the Arrow buttons on the remote
to highlight Advanced Picture, then
press OK. The Advanced Picture menu
is displayed.
3. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press Left/Right Arrow to change the
setting:
• Noise Reduction - Diminishes
artifacts in the image caused by
the digitizing of image motion
content. Select Off, Low, Medium,
or High.
• Color Enhancement - Reduces
oversaturation of some colors and
improves esh tones. Select Off, Normal, Rich Color, Green/Flesh, and
Green/Blue.
• Adaptive Luma - Adjusts the average brightness of the picture to
compensate for large areas of brightness. Select Off, Low, Medium,
Strong, or Extend.
• Film Mode - Optimizes the picture for watching lm. Select Auto or Off.
• Backlight Control - Select Off, DCR (Dynamic Contrast Ratio), or OPC.
• Ambient Light Sensor - The ambient light sensor detects the light
levels in the room and automatically adjusts the backlight for the best
picture. Select On or Off.
4. When you have finished adjusting the Advanced Picture Settings, press the
EXIT button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature will change the “warmness” or “coolness” of the
white areas of the picture.
To adjust the color temperature:
1. From the Picture Settings Menu, use
the Arrow buttons to highlight More,
then press OK.
2. Use the Arrow buttons on the remote
to highlight Color Temperature, then
press OK. The Color Temperature
menu is displayed.
3. Use the Arrow buttons on the remote
to highlight Color Temperature, then
use the Left/Right Arrow buttons to
change the color temperature preset:
• Normal is optimized for television
viewing.
• Cool produces a blue-hued
picture.
• Computer optimizes the picture
for use as a PC monitor.
• Custom allows you to manually change each of the color temperature
settings:
Red/Green/Blue Gain - Adjusts the amount of each color in the
display.
Red/Green/Blue Offset - Adjusts the position of each color in the
display.
4. If you want to reset the color temperatures to the factory default settings,
highlight Reset Color Temperature and press OK.
5. When you have finished adjusting the color temperature, press the EXIT
button on the remote.