Filter
Top Products
24
5
E470VLE
Adjusting the CEC Settings
The CEC function on your TV enables you to control HDMI-connected devices
with the included remote without any additional programming.
Not all HDMI devices support CEC. See your device’s user manual
for details.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight the Settings icon and
press OK. The Settings menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC Settings and press
OK. The CEC Settings menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC Function - To use CEC, you must select Enable.
• System Audio Control - When system audio control is on, you can
control your device’s audio using the TV’s remote control.
• Device Discovery - Use this function to determine if your device is
connected and supports CEC.
5. Press the EXIT button on the remote.
Using the Help Menu
You can use the TV’s Help menu to:
• Display system information
• Reset the TV settings
• Restore the TV to its factory
default settings
• Get guided setup help for the tuner
and network
Displaying System Information
To display a summary of the TV settings:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the Help icon and press
OK. The Help menu is displayed.
3. Highlight System Info and press OK.
4. Use the Up/Down Arrow buttons to
scroll through the system information.
5. When you are finished reviewing the system information, press the EXIT
button on the remote.
Resetting the TV Settings
To reset the TV’s picture and audio settings:
1. Press the MENU button on the remote. The on-screen menu is displayed.
2. Use the Arrow buttons on the remote to highlight the Help icon and press
OK. The Help menu is displayed.
3. Highlight Reset TV Settings and press OK. The TV displays, “Are you sure
you would like to Restore Defaults? This will erase any custom settings.”
4. Highlight Yes and press OK.
5. Press the EXIT button on the remote.