Filter
Top Products
VIZIO GV46L FHDTV20A User Manual
Version 12/28/2007 64
www.VIZIO.com
4.18.2 Using PIP/POP Feature
When using PIP/POP mode, the following screens will appear depending on the type of signal input being
used:
TV refers to the input commonly called RF (coaxial)
connector. It carries audio and video through a
single cable and connector.
AV refers to the inputs commonly called RCA
(composite cables) connectors, on this TV set
there are two inputs, AV1 and AV2; one (AV2)
of which has what is called S-Video connector.
The image signal put through S-Video cable will
have less chance of noise interference since
only the video or image is carried through this
cable.
Component refers to the inputs commonly
labeled and known as Y (Green color coded
connector) Pb/Cb (Blue color coded connector)
Pr/Cr (Red color coded connector). Even thought,
these cables have what is commonly called RCA
connectors at the ends; they will be easily
identified since they are color coded Red, Green
and Blue. There are two sets of component
inputs in your TV set; labeled Component1 and
Component2. Be aware that these cables inputs
will require an extra set of audio (red and white)
cables to complement the video or image signal
carried through these three (red, green and blue)
cables. Often these inputs are mistakenly
referred to by their colors (red, green and blue)
which technically do not have any correlation to
the functionality of these inputs.