Filter
Top Products
VIZIO GV46L FHDTV20A User Manual
Version 12/28/2007 7
www.VIZIO.com
To remove the speakers
If you wish to remove the attached speakers as well and use your Home Theatre System for the audio,
please follow the procedure below.
1. Unplug the speaker wires from the GV46L
FHDTV20A at the rear of the TV set by carefully
pulling down on these two 5-DIN pin connectors.
2. Remove the four (4) screws that hold the right speaker in place and remove the speaker. The
screws are identified by arrows molded into the plastic. After removing speaker, the screws could
be left in place for future use if speaker needs to be reinstalled.
3. Remove the aluminum nameplate from the
front of the TV, between the speakers.
Please make sure no to use excessive
force since there are clips holding the plate
which could break.
4. Repeat step 2 for the left speaker. After
removing speaker, the screws could be left
in place for future use if speaker needs to
be reinstalled.
Note: Do not attempt to remove the nameplate without removing one of the speakers beforehand;
plate will be easily removed after step 2 is done.