Vizio VA26L Flat Panel Television User Manual


 
VIZIO VA26L HDTV10T User Manual
Version 6/5/2008 13
www.VIZIO.com
WIDE – Cycle through the available screen formats (Wide, Normal, and
Panoramic). Note: in RGB/PC mode the options are 4:3 and 16:9.
SLEEP – Press to select the sleep options from 30 to 120 minutes.
MTS – Select the MTS option (Stereo, SAP, or Mono). In DTV mode,
select alternate audio channels, where available.
CC – select the Closed Caption mode (OFF, CC1, CC2, CC3, or CC4).
TV – Press to select TV mode.
AV – Press repeatedly to cycle between AV1 and AV2 inputs.
COMPONENT – Press to select the Component input.
HDMI – Press repeatedly to cycle between HDMI 1 and HDMI 2 inputs.
RGB – Press to select an RGB component such as a computer.
MODE – Select the picture mode (Custom, Standard, Movie, or Game).
The following buttons are disabled because your HDTV does not have
those features:
FREEZE
PIP
PIP CH
AUDIO
PIP INPUT
PIP SIZE
SWAP
Remote Control Range
The effective range of the remote control is approximately 26 feet (8 meters) from the front of the
receiver window and 13 feet (4 meters) when 30° to the left and right, 20° up and down.
Point the remote control at the remote control sensor on the front of your HDTV to send
commands.
Do not place any obstacles between the remote control and the remote control sensor.
VIZIO Remote Control Precautions
Keep the remote control dry and away from heat sources. Avoid humidity.
If your HDTV responds erratically to the remote control or does not respond at all, check the
batteries. If the batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp
cloth.
Do not mix old and new batteries or different types of batteries.