Filter
Top Products
VIZIO P50 HDTV20A User Manual
Version 12/6/2007 30
www.VIZIO.com
Note: At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other
equipment is been used; please press the EXIT key on the remote control and go to Step 5. If this is not
your case, please continue at Step b.
b. The Tuner screen will be displayed;
default choice is Antenna. If you
are using Cable (No Box) Service,
press the button on the remote
control to highlight CABLE.
Press the button on the remote
to go to the next screen.
c. The Channel Scan screen will be
displayed; default choice is Scan.
Press the OK button on the remote
control to commence the search for
available channels to be stored into
memory.
If you do not want to scan for
channels at this time, press the
button on the remote to highlight
Skip Scan and then press the OK
button.
Note: If you select Skip Scan, next time that you decide to complete this procedure; you will need to
select the TV as input (through the Input key) and then go through the Menu option to select the Tuner
setup to get the option of scanning the channels again.