Filter
Top Products
VlZlOVT420M/VT470MUserManual
If your soundsystemhas a SPDIF(optical)digitalaudioinputyou can connectit to the optical
DIGITALAUDIOOUT(whitearea)at therearoftheTV. Thisis activewhenreceivingaudiowiththe
programsbeingviewednomatterwhatinputisbeingused.
.
2.
.
4.
.
.
.
.
Turn off the power to the HDTV and Receiver/Amp.
Using an audio cable (optical cable), connect the cable to the audio input connectors on the
Receiver/Amp and connect the other end to the OPTICAL OUT (white area) audio connectors
at the rear of the LCD HDTV.
Turn on the power to the HDTV and
Receiver/Amp.
Then press the MENU/SELECT button on
the remote control to bring up the On-
Screen Display (OSD) menu.
Press • button on the remote control to
select the Audio menu.
Press I_ on the remote control to enter the
Audio sub-menu. Press the • button to
highlight SPEAKERS.
Press MENU/SELECT key to select Off so
that the sound from the TV will now be
routed through your Receiver/Amp system.
Press EXIT key to exit the menu display.
Note:
Refer to your Receiver/Amp user manual to select the corresponding audio input.
The audio output is not amplified and cannot be connected directly to external speakers.
28
www.VlZlO.com