Vizio VW46L Flat Panel Television User Manual


 
VIZIO VW46L FHDTV10A User Manual
Version 12/7/2007 18
www.VIZIO.com
2.4 Connecting Your Basic Set-Top Box
2.4.1 Using Composite Video
1. Turn off the power to the HDTV and Set-Top
Box.
2. Using the AV Cable, connect the Video
(yellow color) connector on your Set-Top Box
to the corresponding Video (yellow color)
connector in the AV/S-Video group
(yellow/red color area) at the rear of the
HDTV.
3. Using the white and red connectors, connect the cable to the audio output connectors
associated with the Video output on your Set-Top Box and connect the other end to the audio
connectors associated with the AV/S-Video input (yellow/red color area) at the rear of the
HDTV.
4. Turn on the power to the HDTV and Set-Top Box.
5. Select AV using the INPUT button on the remote or side of the HDTV, or directly by pressing
the AV button on the Remote Control.
2.4.2 Using Coax (RF)
1. Turn off the power to the HDTV and Set-Top Box.
2. Using a Coax (RF) cable, connect one end to the TV
OUT (RF) on your Set Top Box and the other end to the DTV/TV input at the rear of the
HDTV.
3. Turn on the power to the HDTV and Set-Top Box.
4. Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing
the TV button on the Remote Control.
5. The most common channels; in which the TV must be at, are either channel3 or channel 4.
Please contact your signal provider to verify what channel the TV must be at.
Note: Refer to your Set Top Box user manual for more information
about selecting the video or RF output of the product.