Filter
Top Products
VIZIO VW46L FHDTV10A User Manual
Version 12/7/2007 6
www.VIZIO.com
Preparing Your LCD HDTV for Wall Mounting
The VIZIO VW46L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing.
If you choose to mount the VW46L FHDTV10A on the wall, please follow the instructions below for
removing the stand base.
To remove the stand base
1. Unplug all of the cables and cords
from your VW46L FHDTV10A.
2. Place the VW46L FHDTV10A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Remove the eight (8) screws holding
the base to the TV.
4. Carefully remove the stand base.
Note: The specs for these screws are M4,
15mm long, .7 pitch.
5. Now, the VW46L FHDTV10A can fit
securely to a mount (sold separately) by
utilizing the mounting holes in the center of
the back panel of the TV. Please make sure to
read the instructions of your specific mount to
properly hang the VW46L FHDTV10A.
The pitch of the mounting holes is 630mm
horizontally and 200mm vertically.
The screw type required is metric M8,
1.25mm pitch. The length of the screws will
depend on the thickness plate being attach to
the TV set; our brackets come with different
length screws.
To find the perfect mount for the VIZIO
VW46L FHDTV10A, browse VIZIO’s certified
mount selection at www.VIZIO.com
or call directly 888-VIZIOCE (888-849-4623).