Filter
Top Products
VIZIO VW46L FHDTV10A User Manual
Version 12/7/2007 24
www.VIZIO.com
2.8 Connecting a PC Computer
1. Turn off the power to the HDTV and PC
Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the
RGB output of your pc computer and the other
end to the RGB PC input (blue area) at the rear of
the HDTV.
3. Connect the Audio Out on your pc computer to
the RGB PC Audio input (blue area) at the rear of
the HDTV. This connection must have a 1/8’
stereo mini plug at one end of the cable to fit into
the computer’s input jack.
4. Turn on the HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the HDTV.
Note:
a) For the best picture quality when connecting a pc computer through RGB PC, please refer
to the pc or graphic card’s user guide to find out if it is capable of an output of 1920x1080
at 60Hzwhen using the parameters and values given to you on Section 2.8.2 of this User’s
Manual by way of VESA Reduce Blanking timing.
b) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.