Filter
Top Products
VIZIO VW47L FHDTV10A User Manual
Version 9/18/2007 10
www.VIZIO.com
1.3 Rear Panel Connections
1. AC IN – Plug-in the supplied AC Power Cord here.
2. SERVICE – This custom communication port is for factory service only. Use of this input for
any purpose other than factory authorized service will void the manufacturer’s
warranty of this equipment.
3. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection.
4. HDMI 2 – Connect the secondary source for digital video such as a DVD multimedia player
or set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection.
5. HDMI 3 – Connect a third source for digital video such as a DVD multimedia player or set top
box through this all digital connector. The white color band on the rear of the TV indicates
this connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI
cable and connect the Analog Audio output of the device to the L+R AUDIO here. . Your
VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from www.VIZIO.com
or by calling 888-VIZIOCE (888-849-4623).
6. RGB PC – Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection. A cable with a 1/8” mini plug stereo connector at the
end connecting to the TV is needed if sound is also transmitted with this signal.
7. COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The green color band on the rear of the TV indicates this connection.
8. COMPONENT 2 (YPb/CbPr/Cr with Audio L/R) – Connect the secondary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The purple color band on the rear of the TV indicates this connection.
9. AV/S-VIDEO IN – Connect a source for composite or S-video image devices, such as a VCR
or video game. Use the white and red connectors to connect the external audio from the
same source, if S-Video is connected; such signal will take priority over the input. The yellow
and red color band on the rear of the TV indicates this connection.
10. DTV – Connect to an antenna or digital cable (no Cable Box) for Digital TV.*
11. OPTICAL DIGITAL AUDIO OUT –When a digital audio signal is associated with an input
which is selected for viewing, the digital audio associated with digital programming will be
available on this SPDIF Optical connector for connection to your home theatre system. The
white color band on the rear of the TV indicates this connection.
12. ANALOG AUDIO OUT – Connect the audio from the LCD HDTV to an external device, such
as a home theatre system, external amplifier or stereo. Speakers cannot be connected
directly to here. The white color band on the rear of the TV indicates this connection.
* For digital TV stations in your area visit www.antennaweb.org
.
1 2
3
7
11
6
8
5
9
10
4
12