Filter
Top Products
VIZIO VW47L FHDTV10A User Manual
Version 9/18/2007 6
www.VIZIO.com
Preparing Your LCD HDTV for Wall Mounting
The VIZIO VW47L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing.
If you choose to mount the VW47L FHDTV10A on the wall, please follow the instructions below for
removing the stand base.
To remove the stand base
1. Unplug all of the cables and cords
from your VW47L FHDTV10A.
2. Place the VW47L FHDTV10A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Pull the stand cover off by squeezing
on both sides of the cover to release
the retaining plastic tabs.
4. Remove the four (4) screws so that the stand base can be
removed.
5. Gently remove the stand base.
6. Now, the VW47L FHDTV10A can fit securely
to a mount (sold separately) by utilizing the mounting
holes in the center of the back panel of the TV.
Please make sure to read the instructions of your
specific mount to properly hang the VW47L
FHDTV10A.
The pitch of the mounting holes is 630mm horizontally
and 200mm vertically.
The screw type required is metric M8, 1.25mm pitch.
The length of the screws will depend on the thickness
plate being attach to the TV set; our brackets come
with different length screws.
To find the perfect mount for the VIZIO VW47L FHDTV10A, browse VIZIO’s certified mount selection at
www.VIZIO.com
or call directly 888-VIZIOCE (888-849-4623).