Filter
Top Products
VIZIO VW47L FHDTV10A User Manual
Version 9/18/2007 25
www.VIZIO.com
2.8 Connecting a PC Computer
1. Turn off the power to the HDTV
and PC Computer.
2. Connect a 15-pin D-Sub RGB
(VGA) cable to the RGB output
of your pc computer and the
other end to the RGB PC input
(blue area) at the rear of the
HDTV.
3. Connect the Audio Out on your
pc computer to the RGB PC
Audio input (blue area) at the
rear of the HDTV. This
connection must have a 1/8’ stereo mini plug at one end of the cable to fit into the computer’s
input jack.
4. Turn on the HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the HDTV.
Note:
a) For the best picture quality when connecting a pc computer through RGB PC, please refer
to the pc or graphic card’s user guide to find out if it is capable of an output of 1920x1080
at 60Hzwhen using the parameters and values given to you on Section 2.8.2 of this User’s
Manual by way of VESA Reduce Blanking timing.
b) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.