VIZIO VX200E User Manual
34
www.VIZIO.com
Advanced Video Features
Press the ▼ button to highlight the option for Advanced Video selection and
press either the ► button to select it. A new menu will be displayed showing
the advanced functions available for fine tuning of the picture.
Noise Reduction
This feature diminishes picture artifacts caused by the digitizing of image
motion content that may be present in the picture. Choose from the Off,
Low, Medium, or Strong setting.
Color Enhancement
This feature increases the picture reproduction performance of the picture
by reducing oversaturation of certain colors and improving flesh tones.
Choose from Off, Normal, Rich Color, Green/Flesh, and Green/Blue setting.
Advanced Adaptive Luma
Large areas of brightness in the picture will result in a higher Average Picture Level (APL) and the
overall picture will look too light. This feature will lower the APL to counteract this effect. Choose from
Off, Low, Medium, Strong, or Extend.
Backlight Control
Set this feature to OFF, DCR, or OPC. DCR (Dynamic Contrast Ratio) improves the black level
performance and increases contrast ratio. OPC (Optimum Power Control) Reduces power
consumption while maintaining the same picture brightness.
Color Temperature
Color Temperature is the “warmness” or “coolness” of the white areas of the picture. Choose from
Normal, Custom, Cool, or Computer. Normal is the setting for television broadcasting. Custom allows
you to set a preset calibrated for a white point to suit individual preferences. Cool produces a blue-
hued image. The Computer setting sets the white point at the established setting for a PC display
(9300K). Each preset may also be adjusted for a customized setting.
Film Mode
Choose from Auto or Off. When set to Auto, the TV will detect the cadence (for example at 24
frames/second for film, or normal video at 60 fps). When set to Off it will stay at 60 fps.
Reset Picture Mode
Press the ▼ button to highlight the option for Reset Picture Mode selection
Press ► button to return on Picture settings to factory default.
A screen will come up to confirm your selection or to cancel it.
Press either ◄ or ► to make the selection.
Press MENU to accept it.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
Note: Only settings under the pictures adjustment will be reset.