VIZIO VX200E User Manual
Version 5/8/2009 35
www.VIZIO.com
Audio Menu
1. Press the MENU button on the remote control and the Picture menu will be
shown on the screen.
2. Press
▲ or ▼ on the remote control to highlight the Audio menu, and then
press MENU to select it.
3. Press
▲ or ▼ on the remote control to select an Audio menu option.
4. Once the menu option is highlighted, press ◄ or ► on the remote control
to adjust the setting.
Note: Equalizer adjustments are available for you to set them to your preferred
settings. Equalizer will not be available if SRS is on.
Once the adjustments are completed press the LAST button repeatedly to exit
the OSD completely.
Equalizer
Press the ▼ button to highlight the Equalizer
selection.
1. Press the ► button to start adjusting.
2. A new menu will be displayed showing
volumes of different frequencies (pitches).
3. Starting from lowest to the highest pitch,
they are 120 Hz, 500Hz, 1.5 kHz, 5 kHz and
10 kHz.
4. Press the
▼ button to highlight the
frequency you wish to adjust.
5. Use the ◄ or ► button to adjust for boost or
attenuation. For example if you want to
boost the bass you would highlight 120Hz
and turn it up.
6. Once the adjustments are completed press the LAST button repeatedly to exit the OSD
completely.
Balance
Adjust the sound to the left or the right.
SRS TSHD
This option sets the SRS TruSurround HD surround sound process. Choose from On or Off.
Note: When SRS TSHD is ON, Equalizer adjustments are not available.
Digital Audio Out
This option allows selection of the type of processing for the SPDIF (Optical connector) when used with a
Receiver/Amplifier/Home Theater system. Select to choose from OFF, Dolby Digital or PCM.