Filter
Top Products
VIZIO VX200E User Manual
Version 5/8/2009 37
www.VIZIO.com
Tuner Mode
Select Cable or Antenna depending upon which equipment you have attached
to the DTV / TV Input.
Auto Search
Automatically search for TV channels that are available in your area. The TV
will search for analog and digital channels.
Partial Channel Search
If you believe channels are missed from the auto search, you can do a partial
channel search to look for channel in a certain channel range again. Select to
scan for Analog, Digital, or both Analog/Digital channels, then press the
▼
button to highlight the “From” and “To” selection. Press the ► button to select
the range of channel numbers you want to start searching in. Press MENU to
start channel search.
Skip Channel
After the TV has stored all of the available digital channels in memory you will
find that some channels are too weak to watch comfortably or they may be
channels you do not want to see when using the CH
▲ or CH▼ buttons. You
will still be able to select this channel using the number buttons on the remote
control. Scroll through the channels listed using
▲ or ▼ or scroll a page at a
time by pressing ◄ or ►. Press the MENU button to select the channel to be
skipped.
MTS
This feature allows you to select the different languages the broadcaster is
transmitting the audio with the program you are watching. This signal is usually
Spanish.
Time Zone
Setting the correct Time Zone for your area will ensure that the correct program times are shown after
pressing the GUIDE button on the remote control.
Daylight Saving
Setting the daylight saving time for your area will ensure that the correct program times are shown after
pressing the GUIDE button on the remote control.
Channel Info
Channel Info displays the technical information of the channel including channel number, frequency,
modulation type, status, SNR (signal noise ratio), and signal strength.