Filter
Top Products
18
Press SETUP on the remote control to get into the SETUP menus. All settings have been preset in the DEFAULT
mode. This means that the most common settings will already be active when you first setup the DVG- 399K. It may
not be necessary to make any changes for the DVG-399K to work correctly.
To exit the SETUP screen simply press SETUP on your remote or scroll down to EXIT SETUP on the MENU MAIN
PAGE and press ENTER on your remote.
SYSTEM SETUP
Press SETUP on the remote control and be sure that SYSTEM SETUP is highlighted.
1. TV SYSTEM
Set the DVG399K’s output to match your TV set’s system format.
For example, NTSC for North American TV systems or PAL for
European systems. Select AUTO if you frequently switch between
PAL and NT
SC modes.
2. SCREEN SAVER
When there is no disc or the player is idle for a period of time,
screen saver will appear if this setting is ON. Using a screensaver
can help protect your TV or monitor’s screen.
3. VIDEO
Choose the video mode based on what video connection you are using.
INTERLACE-YUV:
When you are using a YUV Composite Video connection
P-SCAN YPBPR: When you are connected to a progressive scan TV with
Component Y, Pb, Pr cables.
PC-VGA: When you are connected to a monitor with a VGA cable.
S-VIDEO: When you are connected to a TV using an S-Video connection.
4. TV TYPE
TV Display Modes: You can select one of the following TV display modes for the video output:
4 : 3/PS: When the player is connected to a normal (4:3)
TV and a wide picture is shown on the full screen,
a portion may be cut off automatically.
4 : 3/LB: When the player is connected to a normal TV and
a wide picture is shown on the screen, black strips
appear at the top and bottom of the screen.
16 : 9: When the player is connected to a wide screen TV.
NOTE: If you choose this setting and you don’t have a
wide screen TV, the images on the screen may appear
distorted due to vertical compression.
5. PASSWORD
Enter your password here, to access parental controls. The first time you use this funtion, you will have to input the
factory-set password which is “0000” and then press enter. You may then input your own password and then press
enter again. Be sure that you write down your new password as the factory-set “0000” will not work if you have
changed it.
6. RATING
Parents can control the rating of movie that can be shown on the player. Simply select the rating from the list and
then press enter.
7. DEFAULT
Choosing RESTORE, restores the DVG-399K’s preferences to the original factory settings.
Setting up preferences
To view the standard
4:3 picture or the cut
standard 4:3 picture
4:3 subtitle block to
view the full width of
the widescreen mode
16:9 To view widescreen
picture with a
widescreen TV set
Widescreen TV set
Standard TV set