Filter
Top Products
QUICK START GUIDE
www.wegener.com 800092-02 Rev. A 7
Table 6: iPump 562 Types of OSD Action Fields
Decoder Setup
The Decoder Setup menu is available from the OSD Advanced Setup in the Main Menu, followed by
Unit Setup. See
Figure 4: OSD Decoder Setup Menu below.
Figure 4: OSD Decoder Setup Menu
The following options for decoding the output are available:
Decoder Source
Controls source of input for the primary A/V decoder. The Follow Tune indicates that currently transport
stream is playing from the selected RF source and program number. The source can be changed to
Multicast UDP from Satellite/RF or Multi/Unicast UDP from LAN/ETHERNET port. The source can be
turned off to produce no video/audio output.
TV Aspect Ratio
Allows the server to automatically correct a mismatch in the aspect ratio of TV to the content being
displayed. Available values are 4x3 (Traditional TV), 16x9 (Widescreen TV) and 14x9 (CiniView II).
Button
Actions
Main Menu Submenu Edit Mode
Enter selects submenu or
dropdown list
goes to editable field accepts changes
right arrow no action no action moves cursor to right
left arrow exits OSD goes to previous menu level moves cursor to left or
abandon changes
up arrow goes to next or previous
menu item
goes to next or previous menu
item
increases value of
highlighted item
down arrow goes to next or previous
menu item
goes to next or previous menu
item
decreases value of
highlighted item