Filter
Top Products
800057-02 Rev. A Page 4 of 11 May 24, 2003
Main-level Screens Second-level Screens
2
nd
-level Program Status
where X is the input port number.
Press the ENT key to go to the third-level program status screen.
Press the 4 key to go to the next input (1 through 4).
Press the ESC key to return to the main-level Program Status
screen.
Program Status
Press the ENT key to view the second-level program status
screens.
Press the 4 key to go to Panel Help Timeout.
Press the 3 key to go to Input Setup.
Press the ESC key to go to the Home Screen.
3
rd
-level Program Status
where XXXXX is the program number at input, AAAAAAA is the
service descriptor for the program, Y is the ASI output port, and
BBBBBBB is the available audio on the input for the program (AC-
3, MPEG, or MPG/AC3).
Press the ESC key to return to the 2
nd
-level Program Status screen.
Front-panel Help Timeout
Press ENT and then the 5 or 6keys to select the front-
panel help message timeout. Values of 3, 5, 10, 30, or 60
seconds, or No Timeout may be selected.
Press the ENT key to confirm the selection or ESC to cancel
changes.
Press the 4 key to go to IP Setup.
Press the 3 key to go to Program Status.
Press the ESC key to go to the Home Screen.
Program Status...
Input Number:X
ProgIn XXXXX AAAAAAA
Out:Y BBBBBBB
Panel Help Timeout
10