PARTS LIST
(not all parts listed
due to space constraints)
Rev 4/98
(5) E-Clip
P.N. 5160818
(2) 1/4-20 Hex Nut,
Nylock P.N. 2160220
(4) 1/4" Flat Washer
P.N. 2160039
(2) 1/4-20 X 1.75" Hex
Bolt P.N. 2160238
46cm (18") Reflector, White
P.N. 2745304
(3) 1/4 x 2-5/16" Pin
P.N. 2160814
Bumper Assembly
P.N. 3750823
(2) 1/4-20 X 1.75"
BOLT
P.N. 2160238
Aluminum Gear
Housing
P.N. 3100520
Worm Gear Nut
P.N. 2200045
Model RP-4000
Worm Gear &
Retaining Plug
See replacement
procedure on page 8.
Aluminum Baseplate
P.N. 3100524
1/4-20 X 2.5" Hex Bolt
P.N. 2160237
(2) 1/4" Flat Washer
P.N. 2160024
REAR VIEW
Model RP-3000
Elevating Gear
(2) 1/4" Flat Washer
P.N. 2160039
(4) 1/4-20 Hex Nut,
Nylock P.N. 2160220
Digital Elevation
Device, If attached
the 1/4-20 x 1.75 Hex
Bolts are replaced
with 1/4-20 x 2" Hex
Bolts
Backup
P.N. 2745348
Washer
P.N. 3200657
Retaining Nut
P.N. 2200047
(requires 15/16"
socket wrench)
(10) #10 x 1" Hex
Head Screw P.N.
2160178
Nylon Bearing
P.N. 3200656
Lower Elevating Tube
P.N. 3506033
Upper Elevating Tube
P.N. 3506032
(4) 5/16" Hex Nut
P.N. 2160230
(4) 5/16" Flat Washer
P.N. 2160027
A
12