Filter
Top Products
14
15
OPERATION
Pressing the MENU key when there is no other dialogue window open, will display the main
menu.
The main menu consists of ve menu items as shown below.
1. Installaon•
2. Program Guide•
3. Program Manage•
4. Program Select•
5. PVR•
6. System Seng•
Use the ▲▼ keys to move up or down from one item to another. Press the OK key on your
remote to enter the selected sub-menu.
To exit the menu system at anyme, press EXIT on your remote.
Note: When in sub-menus, pressing the EXIT key will take you back one-step through the sub-
menus. To completely exit from the menu, keep pressing the EXIT key on your remote.
1. INSTALLATION
The Installaon menu allows two ways to search for programs: and Manual
.
1.1 AUTO SEARCH
For beginners the Auto Search feature is the best choice. First use the ▲▼ keys to select Auto
Search from the Installaon menu. Then press OK to enter the Auto Search sub-menu. The
System will automacally search programs under Channel Edit. Once the search is complete,
the newly found programs will be added to the TV program list and your PVR will automacally
display the rst found channel.
During the search process you may press the EXIT key to stop or press the OK key to skip. Press
the EXIT key again to exit from this window.
1.2 MANUAL SEARCH
You can set parameters in Manual Search window if you are familiar with relevant parameters
(such as specic transmission frequencies for specic channels). In this mode, only one channel,
whose necessary parameters are set in Manual Search window by hand, can be searched.
Press the ◄► keys to select proper opon among the Channel List that you can
edit in the Channel Edit window.
Frequency: The value varies with what you have selected in Channel No.
Press the ◄► keys to choose 6M, 7M or 8M.
At the boom of this window, there are two dynamic colour bars reecng the signal’s quality
and strength. You can check whether you have set your antenna well by these two bars.
Aer modifying, press the OK key to start searching. If the search is completed successfully
your PVR will turn to view the rst searched program automacally. During the whole process,
you can press EXIT key at any me to exit.
1.3 CHANNEL EDIT
Select Channel Edit item in the Installaon menu and press the OK key. The Channel Edit
window will be displayed on the screen. From here, new channels can be added and the
exisng ones can be edited or deleted.
You can use the colour keys on your remote to execute the corresponding command shown at
the boom of this window.