Filter
Top Products
18 Operation
MAN0306 (Rev. 5/23/2008)
PRE-OPERATION CHECK LIST
(OWNER'S RESPONSIBILITY)
The operator should perform the following check list
before operating backhoe.
___ Check that backhoe is properly and securely
attached to tractor.
___ Make sure all hydraulic connections are tight
and all hydraulic lines and hoses are in good
condition.
___ Check that there are no leaks in the hydraulic
system. Before operating, all hydraulic hoses
must be routed properly and are not twisted,
bent sharply, kinked, pulled tight or frayed.
___ During inspection, check that all nuts and bolts
are secure and clevis pins are properly cotter
pinned.
___ Place all backhoe controls in neutral position
before starting tractor engine.
___ Check tractor transmission oil level.