Filter
Top Products
Installation and Connection DRS5116
Wren
2003. 09. 06 (v 1.0)
49
11. Network Monitoring & Managing
The DRS can be accessed, controlled, and managed from a remote site via Internet/Intranet.
11.1. Connecting Ethernet
(1) Turn off the DRS power switch.
(2) Connect the DRS to hub with Ethernet cable.
(3) Turn on the DRS power switch.
<Note>
1. Supply power to the DRS after connecting Ethernet cable to protect against electrical damage
2. Check cable connection status.
3. Check LED on the DRS rear panel after supplying power.