Filter
Top Products
Configuration
22 975-0210-01-01
Saving Setup Choices
Once the setup options are complete, press and hold the
Setup/Menu Item buttons (see Figure 3-19) for approximately
five seconds or until the screen clears. The setup choices will
be saved in the inverter/charger’s non-volatile memory 20
seconds after exiting the Setup menu if no other actions are
taken. These settings will be preserved until changed.
Note: The generator start and stop settings will not be saved if
the RC/GS is disconnected or DC power is lost.
Figure 3-19
Setup/Menu Item Buttons
Meter Mode
Menu Item
Setup
RC-GS_manual.book Page 22 Friday, May 20, 2005 4:57 PM