Filter
Top Products
39 En
SETUP menu
Settings
4
SACD Output
Output Priority
You can select the output priority from HDMI or Analog
for playing back SA-CDs.
– Selecting Analog mutes the HDMI output when SA-
CD is played back. For details, see “SA-CD output
formats” (p. 41).
SACD Priority
Selects the playing back priority for 2-channel contents or
multi-channel contents, when the disc contains both types
of contents.
Multi-ch
*
, 2-ch
HDMI Output
You can select audio signal output from HDMI terminal
when SA-CD is played back.
Speaker Setting
2ch Downmix
You can select down mix method to analog 2-ch from
Stereo or Lt/Rt.
Post Process
UpMix
You can multi-channelize the 2-channel audio signal. To
multi-channelize, select DTS NEO:6, then select Cinema
or Music mode.
Off
*
, DTS NEO:6
■ System Information
Software version and MAC address (p. 48) are displayed.
HDMI
*
The settings for SACD Priority and HDMI Output
are applied.
Analog Always plays back the SA-CD’s high quality 2-
channel area. The signal is fully optimized for analog
2-channel outputs to be best quality.
Note
DSD
*
Outputs DSD raw signal. When this Player is
connected to DSD compatible AV receiver, this item
is recommended.
PCM Outputs PCM signal decoded by this Player.
Stereo
*
Changes channel output to stereo, which only
delivers sound from the two front speakers.
Lt/Rt Select this item if this unit is connected to a Dolby
Pro Logic decoder. Sound from rear speakers is
mixed to the 2-ch stereo sound.