Yamaha NX-C300 DVD Player User Manual


 
DVD Setup Menu Options
This setup is carried out via theTV, enabling you to
customize the DVD receiver to suit your particular
requirements.
General Setup menu
O In DVD/CD mode, press SET UP.
Press 4 I_ to select the 'General Setup' icon.
Press ENTER (OK) to confirm.
_]_ In'GENERAL SETUPPAGE',pressAV to highlight
[DISC LOCK],then pressI_.
UNLOCK
Select this to unlock the disc and allow future
playback.
LOCK
Se]ect this to block playback of the current disc.
Subsequent access to a locked disc requires a six-
digit password. The default password is'000 000'
(see "Changing the password" on page 34).
Press AV to select a setting and press ENTER
(OK) to confirm.
_]_ In *GENERAL SETUP PAGE', presss AW to highlight
[DVD-AUDIO], then press I_.
DVD-AUDIO MODE
Select this for normal playback.
DVD-VIDEO 1'40DE
Select this to playback the contents of the DVD-
Video.
Press AV to select a setting, then press ENTER
(OK) to confirm your selection.
Notes:
- The DVD-AUDIO indicator lights up when a DVD-
Audio disc is playing.
-When you select DVD-VIDEO MODE, the DVD-
AUDIO indicator goes out.
Not all discs are rated or coded by the
manufucturer of the disc. You can prevent playback
of a specific disc by locking the disc. You can lock
up to 40 discs on this unit.
You can playback the contents of a disc in the
order you want by programming the tracks to be
played.You can store up to 20 tracks.
Program:Track (except for Picture CD/MP3/
WMA/DivX ®)
Press PROG on the remote control.
OR
In 'GENERAL SETUP PAGE', press AV to highlight
[PROGRAN], then press to select [FTS].
Press ENTER (OK) to confirm.
To program your favorite tracks/chapters
Use the numeric keypad (0-9) to enter a valid
track/chapter number.
TIPS: To return to the previous menu, press _i.
To clear the menu, press SET UP.
29