Yamaha NX-C300 DVD Player User Manual


 
Sound Controls
IMPORTANT!
For proper surround sound, make sure the
speakers and subwoofer are connected to
this receiver (see "Connecting the DVD
receiver and speakers to the subwoofer" on
page 11).
Selecting surround sound
Press SURR on the remote control to select:
MULTI-CHANNEL or STEREO.
•-_ The availability of the various surround sound
modes depends on the number of speakers used
and the sound available on the disc.
•-_ The center and surround speakers operate only
in multi-channel surround mode.
•-_ The available output modes for muki-channel
include: Dolby Digital, DTS (Digital Theatre
Systems) Surround and Dolby Pro Logic II.
•_ Stereo broadcasts or recordings produce some
surround channel effects when played in a surround
mode. However, mono (single channel sound)
sources do not produce any sound from the
surround speakers.
Notes:
- The SURR button is not functional for SA-CD
playback.You must access the disc menu in order to
select between multi<hannel and stereo tracks, (see
"Playing Super Audio CDs (SA-CDs)'" on page 2 7).
- The surround sound mode cannot be selected if the
system setup menu is selected,
Selecting digital sound effects
You can select preset digital sound effects that
match the content of your disc, or that optimize
the sound of the musical style you are playing,
Press EFFECT to select from the available sound
effects.
When playing movie discs or while inTV mode, you
can select:
CONCERT, DRAMA,ACTION or SCI-FL
When playing music discs or while inTUNER or
AUX mode, you can select:
ROCK, DIGITAL, CLASSIC or JAZZ.
Notes:
- Digital sound effects and the treble/bass features
cannot be activated at the same time.
- For flat sound output, select CONCERT or CLASSIC,
Adjusting the treble/bass level
TheTREBLE (high tone) and BASS (low tone)
features enable you to define the sound-processor
settings.
_1 Press TRE or BASS on the remote control.
O Within five seconds, press VO/(+/-) to adjust the
treble or bass level (MIN,-2,-1,0, +1, +2 or MAX).
"_ If the volume control is not used within five
seconds, it will resume its normal volume control
function.
37