Filter
Top Products
Troubleshooting
Problem
The remote control does not function properly.
The remote control does not work for operating
other equipment.
Unable to play DivX movies.
The DVD receiver does not work.
Solution
Select the source (DVD/CD orTUNER, for example)
before pressing the function button (1_, I_ / I_).
Reduce the distance between the remote control and the
receiver.
Replace the batteries with new ones.
Point the remote control directly toward the remote
control sensor.
Check that the batteries are loaded correctly.
Set the correct remote control code. Depending on the
model and year of the product, the DVD receiver's remote
control may not be able to operate it partly or wholly. In
this case, use the remote control supplied with each
procduct.
Check that the DivX file was encoded in 'Home Theater'
mode with a DivX 5.x encoder.
Disconnect the power cord from the power outlet for a
few minutes. Reconnect the power cord and try to
operate again as usual.
NOTE; When sending the product for servicing, both the DVD receiver and the subwoofer are required,
43