Filter
Top Products
Page 20
206-4065
Auto Program (Channel Search)
Using the optional Installer’s
remote control, press POWER to
turn the TV on.
Press MENU repeatedly until the
Setup menu appears.
Use Up or Down ADJ on the
remote control to highlight Auto
Program on the menu.
Press the Right or Left ADJ arrow
to go to the Autoprogram Menu.
Using Up or Down ADJ, choose either
Cable TV or Off-Air Antenna on the
Menu, then press Right or Left ADJ to
begin the Channel Search.
Press OK when the channel search is
complete. This is when the two progress
bars are filled and the message
“COMPLETED SUCCESSFULLY"
appears on the screen.
Auto Program finds channels being received
by the TV tuner.
Cable will not work unless you subscribe to a
cable service.
After the channel search is complete, use
the features on the following pages to:
Add/Delete/Blank channels. Include channel
labels, so that they will appear on the chan-
nel / time display. Choose from the preset
label selections for analog and create your
own labels for digital channels.
1
2
3140OSKZ003AR6
MUTE
POWER
BANK
GUIDE
CH
PREVIEW
SAP
INFO
CC
OK
VOL
CH
CH
VOL
FLASHBK
TIMER
ALARM
MENU
ADJ
ADJ
ADJ
ADJ
BED1
BED2
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
AUDIO LANG.
LANGUAGE
TO PROGRAM
SETUP MENU
2
3, 5
4
3
4
5
6
1
6
Channel search for digital channels will follow
the analog channel search automatically.
After changing from CABLE TV to OFF AIR ANTENNA
(and vice versa) it is necessary to perform the auto program
function in order to get the proper digital information.
Note: If necessary, select tuning band (Cable 1 or Broadcast 0) for Installer Menu item 3-I Band-AFC before doing
a channel search.