Filter
Top Products
CM154 - 923-03489 10 L15V26 - MENUS
USER MENUS
Use the volume up button to select Hold or Run. Hold
means the off Timer feature is not active and Run means
it is. The timer starts when you press the Enter button.
ON TIMER
This timer function operates only if current time has
been already set. In the Timer menu, press the volume
up and then use the channel up/down buttons to select
the on timer option. Press the volume up and then
use the channel up/down buttons to set the hour.
CH.
Timer
Clock
G
Off-timer
G
On-timer
G
-- : -- AM TV 3
Vol 30 Run
7
Move
Adjust
Back
Press the volume up and then the channel up/down
buttons to select minute you want to set. Press the
volume up button and then use the channel up/down
buttons to select the channel at turn-on. Press the
volume up button and then use the channel up/down
buttons to select the volume you want.
Use the volume up button to select Hold or Run. Hold
means the on Timer feature is not active and Run means
it is. The timer starts when you press the Enter button.
If the on-timer function is active (Run), the current
channel will change to the set channel when the on-
timer is activated. Unless a button is pressed within
three hours after the TV is turned on by the on-timer
function, the TV will automatically turn off. The TV
must be in standby mode for the on timer to work.
SLEEP TIMER
Use the sleep button to set the sleep timer. Each press
of the sleep button changes the setting as shown
below. Sleep timer turns the TV off at the preset time.
To cancel sleep time setting, press the sleep button
repeatedly to select [ — ]. The screen display of SLEEP
appears on the screen for 20 seconds prior to TV turn
off.
10
20
30
60
---
240
180
120 90
When the sleep time you want is displayed on the
screen, don’t press the sleep button again. To check
the remaining sleep time, press the sleep button once.
To change sleep time setting, press the sleep button
repeatedly to select time setting you want. If you turn
the TV off after setting the sleep timer, the setting
will be erased.
VIDEO
APC (AUTO PICTURE CONTROL)
APC adjusts the TV to the best picture appearance.
Use the menu button to select the Picture menu. Press
the volume up and then use the channel up/down
buttons to select the APC option.
Clear Optimum
User Soft
CH.
Picture
APC
DRP
User
Clear
Optimum
Soft
User
Move
Back
Clear
DRP (DIGITAL REALITY PICTURE)
DRP improves picture outline in dark areas. While in
the Picture menu, press the volume up and then use
the channel up/down buttons to select the DRP option.
Press the volume up and then use the channel up/
down buttons to select Clear or Soft. Press the enter
button to select and exit.
MANUAL PICTURE CONTROL
While in the Picture menu, press the volume up and
then use the channel up/down buttons to select the
User option. Press the volume up and then use the
channel up/down buttons to select a picture option
to adjust.
Contrast 35
Move
Adjust
Back