Filter
Top Products
10 Projection TV
Installation
Connection Option 1
Set VCR output switch to 3 or 4 and then tune TV to the
same channel number.
Connection Option 2
1. Connect the audio/video output jacks on VCR to the corre-
sponding input jacks on the TV.
When connecting the TV to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
If you have available an S-VIDEO output, the picture quality
is improved; compared to connecting a regular VCR to the
Video input.
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
3. Select the input source with the tv/video button on the
remote control. (If connected to IN 1, select Video 1 input
source)
Do not connect to both Video and
S-Video at the same time.
VCR Setup
VCR Setup