Filter
Top Products
Chapter 2 The Menu System
STB-1001S2 User’s Guide
24
The following table describes the labels in this screen.
2.2.4 System Setup Menu
Use the System Setup menu to check the STB’s date and time settings, change the time zone,
and activate or deactivate Daylight Saving Time.
Figure 7 The System Setup Menu
The following table describes the labels in this menu.
2.2.5 Language Setup Menu
Use this menu to select the STB’s operating language. At the time of writing, only English is
supported.
Table 4 The Audio Setup Menu
LABEL DESCRIPTION
PCM Select this to use PCM (Pulse Code Modulation) audio
compression. Select this only if your TV or audio equipment
(connected to the STB’s S/PDIF connector) also supports PCM.
AC3/AAC Select this to use AC-3 (Dolby Digital) or AAC (Advanced Audio
Coding) audio compression. Select this only if your TV or audio
equipment (connected to the STB’s S/PDIF connector) also
supports AC-3 or AAC compression.
Save Select this to store your changes. You may need to reboot your
STB (use the ON/OFF hardware switch) before the new settings
are used.
Table 5 The System Setup Menu
LABEL DESCRIPTION
Date This is the current date. This comes from an external time server.
Time This is the current time. This comes from an external time server.
Time Zone Select your time zone from the list. In the list, 0 is GMT (Greenwich
Mean Time) so, for example, 8 is GMT plus eight hours.
Daylight Saving Time Select this when Daylight Saving Time is in effect.
Save Select this to store your configuration changes.