Filter
Top Products
Chapter 2 The Menu System
STB-1001S2 User’s Guide
28
2.3.3.2 Network: Static IP Address
Select Static in the Network menu. The following menu displays.
Figure 13 The Network: Static IP Menu
The following table describes the labels in this menu that were not already described in table 7.
Home URL Enter the address of the homepage the STB uses as the Home
menu (the screen that displays when you press the HOME key on
the remote control).
ACS Server This field is for remote management. Change the information in
this field only if you were specifically told to do so.
Enter the address of the auto-configuration server from which the
STB gets its operating settings.
NTP Server Enter the address of the Network Time Protocol server from which
the STB gets its date and time settings.
Save Select this to store your configuration changes.
Table 7 The Network: DHCP Menu
LABEL DESCRIPTION
Table 8 The Network: Static IP Menu
LABEL DESCRIPTION
Mode Select Static to give the STB a specific IP address.
STB IP Enter the IP address you want to assign to the STB.
Subnet Mask Enter the subnet mask of the STB’s IP address.
Gateway Enter the IP address of the network gateway.
Primary DNS Enter the IP address of the primary Domain Name Server. DNS
allows your STB to resolve domain names (such as zyxel.com) into
IP addresses.
Secondary DNS Enter the IP address of the secondary (backup) Domain Name
Server.