Filter
Top Products
Chapter 4 Product Specifications
STB-1001S2 User’s Guide
37
4.2 Power Adaptor Specifications
Wall-mounting Instructions
" It is recommended that you do NOT wall-mount the STB. Wall-mounting kit is
not included.
Complete the following steps to hang your STB on a wall.
" See Table 10 on page 35 for the size of screws to use and how far apart to place
them.
1 Select a position free of obstructions on a sturdy wall.
2 Drill two holes for the screws.
1 Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
RFC 2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5.
IEEE 802.11d Standard for Local and Metropolitan Area Networks: Media Access
Control (MAC) Bridges
TR-069 TR-069 DSL Forum Standard for CPE Wan Management.
1.363.5 Compliant AAL5 SAR (Segmentation And Re-assembly)
Table 12 Standards Supported (continued)
STANDARD DESCRIPTION
Table 13 Power Adaptor Specifications
AC Power Adaptor Model MU18-2120150-A1
Input Power 100~240 Volts AC / 50~60 Hz / 0.6A
Output Power 12 Volts DC / 1.5 A
Safety Standards UL (UL60950-1)
CUL (CSA C22.2 No.60950-1-03)