ZyXEL Communications SMG-700 Cable Box User Manual


 
Appendix A Setting up Your Computer’s IP Address
STB-1001S2 User’s Guide
52
7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens (the General
tab).
If you have a dynamic IP address click Obtain an IP address automatically.
If you have a static IP address click Use the following IP address and fill in the IP
address, Subnet mask, and Default gateway fields.
Click Advanced.
Figure 35 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
8 If you do not know your gateway's IP address, remove any previously installed
gateways in the IP Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
•In the IP Settings tab, in IP addresses, click Add.
•In TCP/IP Address, type an IP address in IP address and a subnet mask in Subnet
mask, and then click Add.
Repeat the above two steps for each IP address you want to add.
Configure additional default gateways in the IP Settings tab by clicking Add in
Default gateways.
•In TCP/IP Gateway Address, type the IP address of the default gateway in Gateway.
To manually configure a default metric (the number of transmission hops), clear the
Automatic metric check box and type a metric in Metric.
Click Add.
Repeat the previous three steps for each default gateway you want to add.
Click OK when finished.