Menu Descriptions
61179641L4-5B 5-71
SNMP/TL1 Configuration Menu
SNMP/TL1 Configuration
Main Menu\System Management\SNMP/TL1 Configuration\
The Simple Network Management Protocol (SNMP)/TL1 Configuration menu (see Figure 5-44)
is used to provision contact information, community names, trap hosts, and the traps enabled
option, which provide control to manage SNMP remote access to the system through inband
management. The TL1 Target ID (TID) is also set from the SNMP/TL1 Configuration menu.
Figure 5-44. SNMP Configuration Menu
The SNMP/TL1 Configuration menu options are shown in Table 5-44.
Table 5-44. SNMP/TL1 Configuration Menu Options
Option Description Function
1 Contact Information This option displays the “SNMP Contact Information
Menu” on page 5-72.
2 Community Names This option displays the “SNMP Community Names
Menu” on page 5-73.
3 Trap Hosts This option displays the “SNMP Trap Hosts Menu” on
page 5-75.
4 Traps Enabled This option is used to toggle between Yes and No to
enable or disable the traps.
5 TL1 Target ID This option is used to set the TID. The TID is required to
use TL1.
TID: TA1248 Total Access 1248
Unacknowledged Alarms: None
SNMP/TL1 Configuration
1. Contact Information
2. Community Names
3. Trap Hosts
4. Traps Enabled Yes
5. TL1 Target ID TA1248
Selection :
'?' - System Help Screen
