Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice
5-116 61179641L4-5B
Operation Mode for Facility Menu
Operation Mode for Facility
Main Menu\Network Port\IMA Main Menu\IMA Provisioning\IMA Facility Provisioning\IMA All Facilities Provisioning\Operation
Mode for Facility\
The Operation Mode for Facility menu (see Figure 5-79) provides options for the operation
mode for each IMA facility.
Figure 5-79. Operation Mode for Facility Menu
The Operation Mode for Facility menu options are shown in Table 5-81.
Table 5-81. Operation Mode for Facility Menu Options
Option Description Function
1 IMA_Group This option is used to add a facility to the IMA group.
2 Unassigned This option is used to remove a facility from the IMA
group.
3 Pass Thru This option is only available for facility #1. This option is
used to allow ATM transport over a single facility without
the IMA layer.
TID: TA1248 Total Access 1248 MM/DD/YY HH:MM
Unacknowledged Alarms: None
Operation Mode for Facility for # 1 IMA_Group
1. IMA_Group
2. Unassigned
3. Pass Thru
'N' - Next IMA Facility 'P' - Previous IMA Facility
Selection :
'?' - System Help Screen
