Chapter 10. ADTRAN Utilities
10-6 ATLAS_800
PLUS
User Manual 61200226L1-1
Clear Log
Deletes the information stored in the
Log
field.
Status Field
This field displays general information about port and transfer status. This field is
read-only. The unlabeled field in the center of the screen displays prompts about
the status of active transfers, such as bytes transferred and received.
Log Field
This field displays a record of all of the events that occur during the time the TFTP
server is enabled. Use the scroll bar to move up and down the list. To clear the
information in this field, from the
Print Log
menu, select
Clear Log
. Save this
information to a file before deleting it with the
To Clipboard
command.
Saving the Current Configuration to a TFTP Server
1. Make sure the TFTP server is running on a remote machine. If you are using
the ADTRAN TFTP Server program, just start the program and the server is
automatically enabled.
2. Log in using Telnet to the ATLAS 800 for which you want to save the
configuration file.
A Level 3 or better password is required for performing a configuration download,
the same level required to modify most configuration parameters. Please consult
the ATLAS administrator if level 3 access is not available.
3. Select the
System Utility
menu, then the
Config Transfer
menu.
4. Set
TFTP Server IP Address
to the IP address of the machine running the
TFTP server program.
If you are using the ADTRAN TFTP server, the IP address displays in the Status
field.
5. Change
TFTP Server Filename
to a unique filename. This will be the name of
the configuration file to save to the remote server.
You must enter the entire directory path to the file name.
Some TFTP servers constrain the format of the filename depending on the op-
erating system of the server. For example, a TFTP server running on a PC un-
der Windows 3.1 may only permit 8.3 format filenames (8 characters, period,
and three extension characters).
6. Move to the
Save Config Remotely
activator button and press Enter to
proceed with the transfer. Respond with
Y to the confirmation request.
7. The
Current Transfer Status
field indicates the progress of the transfer.
8. Once complete, the
Previous Transfer Status
field indicates success or
failure of the transfer. If successful, it will indicate
TFTP Download
