61200226L1-1 ATLAS_800
PLUS
User Manual
2-1
Chapter 2 Installation
BEFORE INSTALLING THE ATLAS_800
PLUS
Carefully inspect the ATLAS_800
PLUS
unit for shipping damage. If you suspect
damage, file a claim immediately with the carrier and then contact ADTRAN
Technical Support (see “Warranty and Technical Support Information” on page C-
1). If possible, keep the original shipping container for returning the
ATLAS_800
PLUS
for repair or for verification of damage during shipment.
CONTENTS OF ADTRAN SHIPMENTS
The following items are included in the ADTRAN shipment:
• The ATLAS_800
PLUS
Base Unit
• The ATLAS_800
PLUS
User Manual
• Power cord
• Network cables (2)
• Rackmount brackets (left and right)
• RJ-45 to DB-25 adapter (modem and direct)
• RJ-45 control port cable (1)
• DSX-1 crossover cable (1)
• RJ-48 to DB-15 adapter (1)
• ADTRAN Utilities diskettes (3)
CUSTOMER PROVIDES
You must supply the 10BaseT cable.
CHECKING THE POWER CONNECTION
Each ATLAS_800
PLUS
is equipped with a detachable 8-foot power cord with a
three-prong plug which connects to a grounded power receptacle.
Power to the ATLAS_800
PLUS
must be from a grounded 115 VAC, 60 Hz or 220
VAC, 50-60 Hz source.
