5
1 2 3
A
B
C
D
12
Install the Ink Tanks
1. Remove the orange tape
completely.
2. Remove the protective lm
completely.
Handle the ink tanks carefully.
Do not drop or apply excessive
pressure to them.
Be sure to use the supplied ink
tanks.
•
•
Hold the ink tank with the orange
protective cap (A) pointing up while
being careful not to block the L-shape
air hole (B).
If the orange tape remains on the L-shape air hole, ink may splash or the machine may not print
properly.
If you push the sides of the ink tank with the L-shape air hole blocked, ink may splash.
Do not touch the inside (C) of the orange protective cap or the open ink port (D). The ink may stain
your hands if you touch them.
•
•
•
Slowly twist the orange protective cap 90 degrees
horizontally to remove it off.
Do not push the sides of the ink tank.
