4 5 63 7
D
C
34
10 Wireless Setup
Select Push button
method, then press the
OK button.
Select WPS, then press
the OK button.
To use the PIN code method for setup, select PIN
code method in
, then press the OK button.
Follow the on-screen instructions to operate the
machine and access point. When the screen in
appears, press the OK button. When the screen in
returns, press the COPY button to return to the
copy standby screen.
A timeout error occurs if setup is not completed
within 10 minutes. If the timeout error screen
appears, press the OK button, then perform the
setup again and set the new PIN code displayed
on the screen to the access point. If another error
appears, refer to the printed manual: Network
Setup Troubleshooting.
•
Press the OK button.
Use the { or } button (C) to select Yes, then
press the OK button.
When wireless connection is enabled, the Wi-Fi lamp (D)
lights blue.
Select Other setup,
then press the OK
button.
