A SERVICE OF

logo

4 5 6
13
5 Install the Ink Tanks
Tilt the ink tank, then insert it under the label and
against the back end of the slot.
Install in a well-lit environment.
Press the PUSH mark on the ink tank rmly until it
clicks.
When the installation is completed properly, the Ink lamp
lights red.
Install all the other ink tanks in the same way
according to the color order indicated on the label.
Make sure all the Ink lamps light red.
Once you have installed the ink tanks, do not
remove them unnecessarily.
Make sure that the color of the label matches the ink
tank.