23
Before You Start
1
Installing and Removing the Battery
Installing the Battery
Detach the battery compartment cap.
•
Grasp both sides of the cap and pull it off.
•
The battery’s protective cover can be attached to
the battery compartment cap. Keep the cap and
cover in a safe place.
1
Insert the battery.
•
Insert the battery and while pushing it in, turn the
release handle as shown by the arrow.
2
Checking the Battery Level
After replacing the battery or before using the camera, check the battery level.
Turn the < > switch to < >.
s
When the < > switch is turned on, the battery
check is executed automatically and the battery
level is displayed on the top LCD panel.
: Battery level OK.
: Battery running low.
: Battery will be exhausted soon.
: Recharge the battery.
If the battery’s rubber lining (for water resistance) is not clean,
use a moist cotton swab to wipe it clean.
Rubber lining
