A SERVICE OF

logo

4. Points to Note When Attaching the Fixing Film
Make sure that the cut off is toward the rear.
Make sure that the front side is aligned with the groove of the heater.
Figure 6-218
5. Points to Note When Attaching the Heater Connector
When attaching the heater connector to the fixing heater, take care not to damage the
heater.
When tightening the screw, hold the connector taking care that its top and bottom are
free of pressure; be careful not to tighten the screw excessively.
Figure 6-219
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
6-20
Film edge
Screw
Heater connector