A SERVICE OF

logo

20) Attach the Switch setting label @7, to the RDD’s top cover q; then, record the setting
of each switch on the label.
Fig. 8-721
21) Fix the RDD’s top cover q in place using two screws w. (Make sure that the Power
Unit’s cable is fixed in place on the cable guide inside the RDD and is not trapped by
the top cover q.
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-38
CHAPTER 8 INSTALLATION
q
w
w
@7