A SERVICE OF

logo

COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-13
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
10) Remove the E-ring !0 and clip ring !1; then, detach the bushing !2. In this condition,
detach the gear and pulley !3 from the main drive assembly.
Figure 7-217
3. Routing the Drive Belt
Route the drive belt attaching them to the pulley and the tensioner as shown in
Figure 4-218.
Figure 7-218