NetworkSetting
Note
•Thesubnetmaskanddefaultgatewayaresetto“0.0.0.0.”UseRemoteUItochangethesubnetmask
anddefaultgatewaytomatchyournetworksettings.
FordetailsonRemoteUI,see“UsingRemoteUI”.(→P.569)
ConguringTCP/IPv6NetworkSettings
WhenprintinginaTCP/IPv6network,youmustconguretheTCP/IPv6settingsontheControlPanel.
FollowthestepsbelowtoconguretheTCP/IPv6networksettings.
1.OntheTabSelectionscreenoftheControlPanel,press◄or►toselecttheSettings/Adj.
tab().
Note
•IftheTabSelectionscreenisnotdisplayed,presstheMenubutton.
2.PresstheOKbutton.
TheSet./Adj.Menuisdisplayed.
3.Press▲or▼toselectInterfaceSetup,andthenpresstheOKbutton.
4.Press▲or▼toselectTCP/IP,andthenpresstheOKbutton.
5.Press▲or▼toselectIPv6,andthenpresstheOKbutton.
6.Press▲or▼toselectIPv6Support,andthenpresstheOKbutton.
7.Press▲or▼toselectOn,andthenpresstheOKbutton.
Important
•OnceyousetIPv6SupporttoOn,theIPv6StlessAddrssettingtakeseffect.
•YoucanalsocongureIPv6StlessAddrsandDHCPv6fromtheprinterControlPanel.
568NetworkSetting
