3-8 Print media handling Chapter 3
Loading print media
Loading paper
Follow this procedure to load paper in the multi-purpose tray:
1 Open the multi-purpose tray q, then the
tray extension w.
2 Place a stack of paper (print side up)
in the multi-purpose tray q and
adjust the paper guide A to the
width of the stack w.
•Make sure the stack does not exceed the
paper limit mark B.
Loading envelopes
Follow this procedure to load envelopes in the multi-purpose tray:
1 Make sure the paper thickness lever is
set to the right.
•For details, see p. 3-6.
2 Open the multi-purpose tray, then the
tray extension.
3 Prepare the envelopes for loading:
Press down firmly on the edges of the
envelopes to make the folds crisp. Also,
press firmly on the area that corresponds
to the edges of the back flap.
