3-10 Print media handling Chapter 3
Loading banner paper
NOTE
•Always leave an extra sheet at the end of the banner—just in case the type runs over.
•Printing on banner paper may require considerable amounts of ink so use new ink tanks if necessary.
•For best print results on banner paper,use light design patterns.
Follow this procedure to load banner paper in the multi-purpose tray:
1 Make sure the paper thickness lever is
set to the right.
•For details, see p. 3-6.
2 Lower the tray extension on the multi-
purpose tray.
3
Cut the banner paper to the required
length and place it behind the machine
on a flat surface.Then insert the first
sheet in the multi-purpose tray q and
adjust the paper guide A to the width
of the sheet leaving an
! / 8
inch (1 mm) gap
between the paper guide and edge of
the sheet w.
•Make sure the sheets behind the machine are
aligned with the first sheet.
4 Set your computer to print on banner
paper.
•Allow the paper to flow over the edge of the
table as it exits the machine.
