Chapter 11 Machine settings 11-1
11
Machine settings
Machine settings
Chapter
11
Accessing the machine settings
Follow this procedure to change a setting:
1 Refer to the lists on the following pages to find the setting you want to change.
2
If there is a reference for the
setting A,refer to that page for
details. If not, at the top of the list,
note under which function key B
and menu C the setting is located.
3 Press [Copy], [Scan], or [Photo Print]
depending under which function
key B the setting is located.
4 Press [Menu] repeatedly until the
menu C under which the setting is
located is displayed.
5 Use [2] or [3] to select the setting you want.
6 Press [Set].
7 Follow these guidelines to scroll through and register settings:
•Use [2] or [3] to scroll through settings.
•To register a setting or access sub-settings, press [Set].
•If necessary, to return to standby mode, press [Stop/Reset].
NOTE
•<> in the LCD indicates the current setting.
Name
2 on 1
BORDERLESS COPY
IMAGE REPEAT
AUTO
MANUAL
VERTICAL
HORIZONTAL
MIRROR IMAGE
ENTIRE IMAGE
Setting
—
—
—
—
1/2/3/4
1/2/3/4
—
—
Details
p. 6-5
p. 6-6
p. 6-7
p. 6-9
p. 6-10
Description
Copies two pages on one page (letter- or A4-size only).
Copies without any borders (letter, A4-,or 4" × 6"-size
only).
size.
Prints multiple copies of an image on a single sheet.
Automatically selects the number of repetitions.
Manually selects the number or repetitions.
Select the number of vertical repetitions.
Select the number of horizontal repetitions.
Prints a mirror image of the original.
Prints the original image to fit the selected paper
Menu:SPECIAL COPY Function key: [Copy]
C B A
Example:
